With the rapid development of new technologies in wood processing industry, the importance of efficiency is self-evident. So, what are the advantages of square wood multi-saw compared with band saw?
1. The square wood multi-piece saw can process Chinese fir pallets, wood keels, wood boards, etc. It has the advantages of stable output, high processing efficiency and simple operation. Compared with the band saw, the processing efficiency of the square saw is 4 times that of the band saw, similar to that of the circular saw.
2. The saw blade and saw tooth of the square wood multi-piece saw are made of superhard alloy steel, and the speed of the saw blade is 3000-4000 rpm. At such a high speed, the surface of cracked wood is much smoother than that of band sawn wood, which can be used directly, and also saves the cost and time of the entire production process.
3. Multi-saw is the key technology to save time for square wood multi-saw. It is a device composed of multiple saw blades. It consists of upper and lower spindles. Each spindle is equipped with 4-16 saw blades. It can be seen that the number of plates produced each time is at least 3-15. Compared with the band saw that only produces one plate at a time, this efficiency multiplication is obvious.
The price of multi-piece saw is higher than that of band saw, but in addition to the high production efficiency mentioned above and the safe and simple operation of multi-piece saw, ordinary small workers can start production without looking for special technicians, saving labor costs.
Advantages of heavy square wood multi-saw;
1. High output: the comprehensive output of wood equipment such as band saw is 70%. The comprehensive output rate of heavy square wood multi-saw is higher than 85%, and the qualified rate of the comprehensive processed plate is up to 99%. Compared with wood making equipment such as band saws, the wood loss of a wood factory that processes thousands of cubic meters a month can increase: 1000 cubic meters times 15% of the log, and the loss rate is less than 150 cubic meters.
Second, high work efficiency: each master can process 8 cubic meters of wood making equipment such as band saws per day, while the heavy square saws are 25-35 cubic meters.
3、 Strong safety: the heavy-duty fulcrum square wood multi-piece saw is fully closed with power transmission device and saw blade, and has fine reversing device and anti-opening device, which is very safe to operate.
4. Simple operation: the master who operates the heavy fulcrum square wood saw is not professional enough, and the ordinary worker operates very fast.
5. Simple maintenance: the structure design of the heavy square wood multi-piece saw is scientific and reasonable, and the components are standardized, mass produced, of good quality, and not easy to wear.
The intransitive verb environmental protection: the machine body is closed, the noise is low, and the wood chips are discharged into the professional chip removal tank, which will not cause a bad dust accumulation environment.
7、 High plant utilization: due to high efficiency and few employees, each conventional product covers an area of at least 10 square meters.
8、 High utilization rate of raw materials: many models and high utilization rate of raw materials. In addition to the commonly used processing methods of square logs and square specification boards, there are also auxiliary equipment such as square wood multi-slice saws, which provide heavy support for the boards and make the boards, triangle materials and other waste materials recycled!
9、 The heavy fulcrum square wood is sawed in multiple pieces, the sawing process is stable, the sawing accuracy is high, and the sawed wood surface is good, smooth, uniform and smooth, without further pressing and planing, so as to reduce wood waste.