What is the main structure of the round log sliding table saw?
The main machine part of the log sliding table saw includes the bed, workbench, longitudinal section channel, main saw, dotted line saw, electric and other parts. The structure and working principle are similar to the ordinary circular saw blade, which can be used as an ordinary circular saw alone.
Configuration of log sliding table saw:
1. Main parts of rack; Groove saw part; 4. Side guide baffle; 5. Fix the workbench; Sliding sliding table; Skew saw guide; 8. Bracket 9. Inclined roof angle display device; 10. Side guide baffle.
The main structural feature of the push saw is the use of two saw blades, namely the main saw blade and the saw blade. During cutting, the dotted line saw shall be sawed in advance, and the groove with the depth of 1~2mm at the bottom of the processing plate and the width of 0.1~0.2mm thicker than the main saw blade shall be sawed first, so as to ensure that the edge of the saw blade will not tear when the main saw blade is cutting, and obtain good saw blade quality. The broken line saw blade has a small diameter, usually about 120 mm, and is driven by a separate motor. The saw blade speed is generally above 9000r/min, and the cutting speed is generally 56~60m/s. The underline saw blade should be aligned with the main saw blade in the same vertical plane. Main saw blade diameter 8943; Generally 300~400mm, the main motor moves through a tripod. According to the diameter of the circular saw blade and the material type of the processing plate, the circular saw blade can use the tower wheel for speed change. The tower wheel speed change structure is simple and the power is stable, which is more in line with the actual needs of wood processing. The power of main motor is generally 4~9kw. In order to adjust the speed conveniently and use a special tripod, a single belt can be used to ensure the transmission of the required power. The rotation speed of the main saw blade is generally 3000~6000 r/min, and the spacing between the main saw blade and the dotted line saw blade is generally about 100 mm.
Another main structural feature of the push saw is that it can not fix the saw blade and saw blade, and it can push back and forth the mobile workbench made of aluminum material containing manually processed wood for sawing. The guide rail of the mobile workbench collects the special structure of J, so it is portable, labor-saving and high processing accuracy when manually pushing the conveyor.
Most of the beds of the dense table saw are welded by steel plates with a thickness of 5~6 mm, which are stable and beautiful. The early sawing and processing paper can be used to make inclined and twisted deformation clamps, which are not fixed on the bed, and collect Caichuan castings, which are flat and not deformed. The clock and cable chart board and its adjustment mechanism are set.